How to use the Europe Magic Wand
How to use the Europe Magic Wand
Using the Europe Magic Wand is very straightforward. Follow this step-by-step guide to get the most out of it from the very first use.
Step by step
1. Plug in
Plug the wand's cable into any standard 230 V domestic power outlet (European Schuko plug). No adapter or transformer is needed. The cable is 236 cm long, giving you plenty of freedom of movement on the sofa, in bed or on the floor.
2. Switch on and choose your speed
Press the power button. The wand will start at level 1 (3,000 RPM — the gentlest setting). Press the speed button repeatedly to cycle through all 6 levels up to 6,000 RPM. If this is your first time, we recommend starting at level 1 or 2 and increasing gradually until you find the most comfortable intensity.
- Levels 1–2: gentle, relaxing massage — great for warming up.
- Levels 3–4: moderate pressure — suitable for most uses.
- Levels 5–6: intense vibration — for deep muscle tension and knots.
3. Apply the massage
Glide the head over the area you want to massage using slow, circular movements. There is no need to press hard — let the vibration do the work. You can use it directly over clothing or on bare skin.
Recommended areas: neck, shoulders, back, glutes, thighs, calves and feet.
Avoid using it on open wounds, acute inflammation or directly over bones.
4. Attach accessories (optional)
The Europe Magic Wand is compatible with a wide range of silicone heads. To attach an accessory, switch the wand off and press the head onto the tip of the device until it clicks firmly into place. Available accessories: Genius, Genio, Silky Touch and Vintage Touch.
5. Cleaning and hygiene
After each use, switch off the wand and unplug it. Clean the head with a soft cloth dampened with water and a few drops of mild soap, or with a silicone-safe cleaning spray. Do not submerge the device in water or hold it under a tap — it is not waterproof.
Store it in a clean, dry place away from direct sunlight. If you use accessories, clean them separately following the same instructions.
Maintenance tips
- Do not use the wand for more than 20–30 minutes continuously to avoid overheating.
- If the motor becomes warm, switch it off and let it rest for a few minutes before continuing.
- Store accessories in individual bags or pouches to keep them hygienic.
- Do not use silicone-based lubricants with silicone accessories, as they can damage the material — use water-based lubricants instead.
- Check the cable regularly and do not use the device if the cable is damaged.
Still have questions?
If you have any questions about using the wand or about the accessories, check our Frequently Asked Questions or contact us directly.